9289379709 7838392800

Learning

ISI Certification

Krishna Kumar
| Updated: 27 Sep, 2022 | Category: ISI Certification

How to Obtain BIS ISI Certification for Poly Aluminium Chloride in India?

BIS ISI Certification for Poly Aluminium Chloride
Reading Time: 4 minutes

Aluminium, Chlorine, Oxygen, Sulphate, and Hydrogen combine to form pure Poly Aluminium Chloride, an acidic solution. It goes by the names PAC, PAX, and Poly Aluminium Hydroxide Chloride Sulphate Solution and it is slightly yellow in colour. Poly aluminium chloride is a highly effective water treatment agent that acts as a coagulant to clump and remove suspended matter, pollutants, and colloidal matter. This causes floc to form, which can be removed using filters. In IS 15573:2018, Poly Aluminium Chloride is covered. This Indian Standard was adopted by the Bureau of Indian Standards (BIS)[1] following approval by the chemical division council of the draught that the water quality sectional committee had refined. The characteristics, prerequisites, sampling, and testing procedures for poly aluminium chloride powder and liquid are specified in this standard. Poly aluminium chloride is an efficient coagulant for removing minute suspended particles quickly from natural surface waters with a wide range of temperature, turbidity, and PH (Potential of Hydrogen). Algae can be eliminated with it. The substance will either be liquid or powder. Medium basicity and high basicity are the two categories. Both classes of coagulants are efficient in treating low to high-turbidity surface raw water for drinking purposes. The liquid form of poly aluminium chloride must be colourless to pale yellow, hazy to translucent, and free of organic impurities. The colour of poly aluminium chloride power should be pale yellow and free of organic impurities. Poly aluminium chloride power should be pale yellow and free of organic contaminants. This blog will discuss BIS ISI Certification for Poly Aluminium Chloride in India.

An Overview of BIS ISI Certification

ISI is a short form for the Indian Standards Institute. The certificate scheme under BIS ensures which product withstands the BIS Indian Standards and safety. BIS ISI Certification allows using the ISI Mark. Under the BIS ISI Certificate, 360+ products fall that require a BIS ISI Certification mandatorily; without this, the Manufacturer won’t be able to manufacture and sell products in India. The BIS ISI Certification is the most recognised product quality certification. BIS ISI Certification ensures the quality and safety standards of products delivered to consumers. The BIS ISI Mark guarantees which products adhere to Indian Standards. The procedure to obtain ISI Mark is a voluntary act. The BIS Certificate proves which products are safe to use. Any manufacturer or importer who wants to register their product with the ISI scheme of BIS needs to follow pre-defined processes from the authority, which comprise application form filing, testing of the product, inspection, and application scrutiny.

Benefits of Obtaining BIS ISI Certification for Poly Aluminium Chloride

Following are some benefits of obtaining BIS ISI Certification for Poly Aluminium Chloride in India:

  • Market Benefits: This Certificate will give huge market advantages over uncertified products like the unchallenging and uninterrupted production of products. ISI Certification verifies that applicant products have been produced with proper Indian standards, which confirms safety.
  • Provides Competitive Advantage: BIS ISI certification shows the standard quality of the product, which provides the Manufacturer with a competitive edge because a consumer always prefers a certified product.
  • Access into Market: A certified product provides an extensive market because it shows better quality & conformity to following safety standards & consumers’ security. A product with this mark would be more trustworthy, providing you with more comprehensive market access.

Documents Required for Obtaining BIS ISI Certification for Poly Aluminium Chloride

Following are some documents required for obtaining BIS ISI Certification for Poly Aluminium Chloride in India:

  • Address proof of the manufacturing unit;
  • Latest utility bills like electricity bills, gas bills, water tax receipts, etc.;
  • A certified copy of the test report by a BSI-certified lab;
  • Details of equipment used for testing;
  • Certificate copy from the Regulatory Authority;
  • Copy of Trademark Registration Certificate;
  • Layout plan of the factory;
  • A copy of the bank statement of the company;
  • Flow chart of the manufacturing process;
  • Copy of Certificate of Registration;
  • Indian residency proof;
  • Packaging details such as product size, quantity, storage facility, etc.;
  • Particulars regarding the raw material being used;
  • Product or component drawing.

Process for Getting BIS ISI Certification for Poly Aluminium Chloride

The BIS ISI Certification for Poly Aluminium Chloride can be obtained following two different procedures:

Normal Process to Obtain BIS ISI Certification

Step 1: First, the applying party must prepare for the BIS Certificate requirements, especially setting up in-house labs and preparing products per Indian Standards with other required documents.

Step 2: Afterward, the BIS official will conduct an inspection process of products along with the factory/industry.

Step 3: Once the inspection gets completed, the sealed samples of the goods are further sent for testing at the BIS-approved laboratories.

Step 4: If the product passes all the test parameters, it only gets approved by the BIS, and the authority issues the BIS certificate for Indian Manufacturers within 60 to 65 days of submitting the application.

Simplified Process to Obtain BIS ISI Certification

Step 1: Initially, the applying party submits the report of the samples already tested and approved by BIS as per Indian Standard.

Step 2: Afterward, the applicant must submit a BIS online registration application and BIS Certification Cost along with other required documents.

Step 3: During scrutiny of application documents, the BIS official will conduct an inspection process of products along with the factory/industry.

Step 4: Once the inspection gets completed, the sealed samples of the goods are further sent for testing at the BIS-approved laboratories.

Step 5: Then, if verified and approved according to the commended standards, the BIS grants the certificate within 35 days to 40 days of application.

Packing & Marking Process in Obtaining BIS ISI Certification for Poly Aluminium Chloride

Packing & Marking shall be done in under IS 15573:2018. The liquid material must be packed and transported in acid-resistant rubber/plastic-lined tankers. The container must be labelled with the details specified in the Indian standard. The ISI Mark shall be marked on all containers of Polyaluminium Chloride, provided that the material so marked meets each of the requirements of the specification. The Manufacturer must obtain a BIS license from the BIS to use an ISI Mark. The BIS issue a certificate based on a successful assessment of quality control, manufacturing infrastructure, testing capabilities, and manufacturing process.

Conclusion

Poly Aluminium Chloride products for water treatment are typically characterised through their level of basification (in %). Basification is the concentration of hydroxyl categories relative to aluminium ions. The higher performance regarding contaminant removal, the higher basicity, the lower the aluminium content, and therefore. This lower rate of aluminium also benefits the process where aluminium residuals are greatly reduced.

Read our Article:How to Obtain BIS ISI Certification for Boric Acid in India?

Krishna Kumar

Krishna Kumar has completed BA-LLB with a specialization in constitutional Laws from ICFAI University. As a recent graduate, He has both legal research and content writing experience in various law firms. He secures good drafting skills for various legal documents in multiple fields of law.

ISI Certification

Krishna Kumar
Krishna Kumar | Date: 23 Jul, 2022

A Complete Study of BIS ISI fo...

The BIS (Bureau of Indian Standards) issue the ISI mark for electric motors. The manufacturer has to complete the d...

Continue Reading
Karan Singh
Karan Singh | Date: 25 Oct, 2022

An Overview of BIS ISI Certifi...

A domestic gas stove is a stove that is fueled by combustible gas like LPG gas, propane, butane, syngas, butane or...

Continue Reading

No Comments

Leave a Reply

Request a Call Back

Are you human? : 4 + 2 =

Transform your Business. Subscribe our Newsletter.