Electrical appliances have become mandatory everywhere. Now we can’t live a single day without modern appliances. It requires safety and quality. Without proper safety, a short circuit, fire, or electric shock can occur.
So, the government has brought a new rule- Safety of Household, Commercial, and Similar Electrical Appliances (Quality Control) Order, 2026. It has been made under the BIS Act, 2016. This new rule will take effect on October 1, 2026.
This rule increases human safety, reduces accidents, and brings good-quality products to the market. From now on, BIS certification and an ISI mark have become mandatory for the product.
So, using safe products is now gaining more importance.
What is BIS Certification for Electrical Appliances?
BIS Certification for electrical appliances verifies whether an electrical product is manufactured properly. The safety and quality rules set by the government are checked here to verify whether the product complies with those rules. So, it can also be called a trustworthy mark.
The product that receives BIS certification is given the ISI mark. Buyers can determine the product’s safety and usability by observing this mark.
The product must comply with IS 302 (Part 1): 2024 standard to get this certification. It is again made as per IEC 60335-1:2020.
BIS Certification ensures:
- The product is safe
- The quality is correct
- It is reliable for the user
This certification is given as per Scheme-I (BIS Rules, 2018), where testing and factory checks are done.
Key Highlights of 2026 Quality Control Order
The government has brought this new rule by issuing Gazette Notification S.O. 1739(E) on April 6, 2026. According to this rule, BIS certification has been made mandatory for many types of electrical products.
Some important aspects of this order are given below:
- A total of 90 types of electrical products has come under this rule
- Before selling or importing any product, there must be a BIS certification
- This rule affects everyone, from manufacturers and importers to sellers
- The rules can lead to fines or other penalties for non-compliance.
The government actually wants to prevent bad or unsafe products from coming into the market. And that the quality of all products is correct.
The key objective of the government:
- To stop the entry of substandard or unsafe products into the market
- To ensure good quality products in the Indian market
This order is an important step towards improving consumer protection and market standards.
Scope of Applicability
The following rule applies briefly below:
This order applies to:
- Household electrical appliances
- Commercial appliances
- Other devices of similar use
Voltage limits:
- Up to 250V for single-phase
- Up to 480V in other cases
Includes:
- DC-powered appliances
- Battery-powered products
Excludes:
- Products covered by any other QCO
- Appliances are regulated by a separate law
This rule is quite broad and covers almost all types of everyday electrical products.
List of Covered Electrical Appliances
A total of 90 types of electrical appliances has been covered under this order. Below are some examples by category in the table:
| Category | Examples |
| Kitchen Appliances | Cooking ranges, ovens, frying pans, deep fat fryers, coffee makers, food processors, centrifugal juicers, dishwashers, steam cookers, hot plates, noodle makers, potato peelers, baking ovens, electric knives, shredders |
| Personal Care | Electric shavers, clippers, oral hygiene appliances, massage appliances, beauty care (laser) appliances |
| Cleaning & Laundry | Vacuum cleaners, tumbler dryers, clothes dryers, towel rails, floor treatment machines, fabric steamers, food waste disposers |
| Heating & Comfort | Water boilers, appliances for heating liquids, blankets, flexible heaters, sauna heating appliances, humidifiers, air-cleaning appliances, vaporizers |
| Commercial Appliances | Commercial cooking ranges, doughnut fryers, griddles, grills, outdoor barbecues, insect killers |
| Battery/DC Appliances | DC/battery vacuum cleaners, shavers, trimmers, blenders, juicers, air purifiers |
| Specialized Equipment | Whirlpool baths, spas, motorized furniture, personal e-transporters, amusement machines, electrolyzer, toilet appliances |
Along with this, some other products like electric heating tools, electrolyzer, insect killers, toilet appliances, etc. are also included in this list.
A detailed list of all 90 products is given in the official gazette notification.
Who Needs to Comply?
This rule applies to many types of businesses. Simply put:
- Manufacturers- They must get BIS certification for their products
- Importers- They must ensure that the products brought from abroad comply with the BIS rules
- Retailers & Sellers- No product can be sold without BIS
- MSMEs- They must comply with the rules within the stipulated time
Implementation Timeline
This new rule is not being rolled out for everyone at once. Time has been given in stages so that small businesses can also adapt easily.
- 1 October 2026- For large manufacturers and importers
- 1 January 2027- Small Enterprises
- 1 April 2027- Micro Enterprises
This step-by-step timeline has been given so that MSME businesses can prepare without stress.
Another important point is that products that are already in stock can be sold for up to 6 months if they have BIS certification.
Read more – How to Apply for BIS Certification for Chains for Motorcycles (IS 11740)?
Key Exemptions Under the Order
This rule does not apply to all products in the same way. Exemptions have been given so that there is no problem in business and research.
- Export Products- Products that will only be sent abroad do not require BIS certification
- R&D Imports- A maximum of 200 units can be brought in a year for research or testing (they cannot be sold)
- Pre-implementation Stock- Products manufactured or in stock before the rule is implemented can be sold for a certain period.
The key purpose of these exemptions is to encourage innovation or research and not create sudden pressure on businesses. So, the government has made the rules.
BIS Certification Process Explained
There are several steps to getting BIS certification. The entire process can be done easily with below easy steps-
Step 1: Application Submission
First, you have to apply to the BIS portal. Here you must provide product information, factory details, etc.
Step 2: Product Testing
Then the product is tested in a BIS-approved lab. Here, safety and quality are checked.
Step 3: Factory Inspection
The BIS team visits the factory and sees if everything is going according to the rules.
Step 4: Grant of License
If everything is fine, the license is granted by BIS.
Step 5: Use of ISI Mark
The ISI mark certification can be used for the product after getting the license.
Step 6: Ongoing Surveillance & Renewal
Even after getting the certification, checks are done occasionally. It also has to be renewed when the time comes.
The entire process takes 3 to 6 months. So, it is better to prepare in advance.
Penalties for Non-compliance
There are major penalties for not following the rules. Let’s see the below penalties to avoid in advance:
- Fines- You may have to pay a financial penalty
- Imprisonment- In serious cases, you may even be imprisoned
- Product Recall- You may be asked to withdraw the product from the market
- Ban on Sale- The sale of the product may be completely stopped
The punishment may be more severe if you make the same mistake again. So, it is very important to follow the rules on time. This can avoid trouble and keep the business safe.
Benefits of BIS Certification for Electrical Appliances
BIS Certification for electrical appliances has benefits not only for consumers but also for businesses and governments.
For Consumers:
- Safety is ensured, risk is reduced
- Products are trusted to be used
For Businesses:
- Increases credibility in the market
- Easily sells products in the market
- Stay ahead of the competition
For Government:
- Reduces imports of bad or low-quality products
- Improves the quality of the country’s products
So, BIS certification is beneficial for everyone. It ensures both safety and quality.
Read more – BIS Certification for Electrical Plugs
How Can Corpbiz Help with BIS Certification?
The entire process of BIS certification can sometimes seem a bit complicated, especially for those who are doing it for the first time. Here, Corpbiz acts as a reliable compliance and advisory partner. We guide businesses from start to finish so that they can get BIS certification easily and properly. The entire process becomes much easier with the help of Corpbiz.
Our Services:
- BIS Registration & Certification Support – Full support from application to obtaining a BIS certificate
- Product Testing Coordination- Arrangement of testing with BIS-approved labs
- Compliance Gap Analysis- Identifying where there are problems in your product in advance
- Import Clearance Assistance- Providing necessary guidance when importing products from abroad
- MSME Advisory & Timeline Planning- Creating a plan according to the right time for small businesses
- Ongoing Compliance & Renewal Support- Help in complying with the rules even after getting the certification
- Lab Recognition- Recognizing laboratories through the BIS lab recognition scheme
We make the process from start to finish simple and hassle-free. So, the entire process of getting BIS certification becomes much easier with the help of Corpbiz.
Conclusion
According to the new QCO of 2026, BIS certification has now become very important. If it is there, both the safety and quality of the product are correct.
This keeps customers safe, increases trust in the business, and maintains excellent quality in the market. Delaying may result in fines or other problems. So, it is better to be ready in advance.
Businesses that prepare in advance can easily survive in the market and move forward. Corpbiz is by your side as a trusted partner in this entire process so that your BIS certification is completed easily and correctly. So, contact us today to boost your business growth.
FAQs for BIS Certification for Electrical Appliances
What is BIS certification for electrical appliances?
BIS certification means that the product has been made according to the rules set by the government. It can be called a safety check. Having this certification means that the thing is fairly safe to use. So, the customer also has little confidence.
Is BIS certification mandatory for all electrical appliances?
BIS is not required for all electrical products. But the new rules of 2026 have made it mandatory for some specific products. There are about 90 types of products on this list. So before starting a business, it is good to check whether your product falls under this list.
What is the ISI mark, and its importance?
The ISI mark is given on the product that has received BIS certification. This mark ensures that the product has passed the safety test and the quality is okay. It largely acts as a symbol of trust. So, if there is an ISI mark, buyers can buy products with confidence.
When will the QCO of 2026 come into effect?
This new QCO will be fully implemented from October 1, 2026. Businesses have been given some time to prepare before that. However, not for all businesses on the same day. Earlier, for large companies, some additional time has been given to small and micro businesses so that they can prepare.
Who is obliged to get BIS certification?
According to this rule, the manufacturer, importer, and seller must all follow this rule. Those who manufacture products have to be certified. Those who bring them from outside also have to check whether the product is approved. Otherwise, there may be problems later.
Which products come under this order?
About 90 types of electrical appliances come under this order. These include kitchen appliances, personal care devices, cleaning products, heating equipment, commercial machines, etc. For example, oven, coffee maker, vacuum cleaner, heater, humidifier, etc. So, many products used in our daily lives fall under this.
Is there any exemption in the BIS certification?
Yes, an exemption has been given in some cases. For example, BIS is not required for products made for export. Also, a limited number of products can be brought for research or testing. Some products made before the rules were introduced can be sold for a certain period. This does not cause problems for businesses.
What is the process of getting BIS certification?
To get a BIS certification, first, you have to apply. Then the product is tested in a BIS-approved lab. Then a factory inspection is done. If everything is fine, a license is given, and the ISI mark can be used. Later, regular checks and renewals have to be done. The whole process usually takes 3 to 6 months.
What can be the punishment for not following the rules?
If someone sells a product without BIS, then there can be a problem. There can be a fine, sometimes even jail. That product is asked to be withdrawn from the market. It can also stop selling. It can result in harsher penalties for repeated mistakes. So, it is very important to follow the rules.
How can Corpbiz help with BIS certification?
Corpbiz helps with the entire process of BIS certification. We guide you through everything from application to testing, documentation, and approval. We also provide import clearance and MSME planning and renewal support. This saves business time and reduces errors. So, the entire process becomes much easier.
Read more – Understanding BIS Certification for Baby Products in India
