Unlined molded rubber boots are broadly used for their optimal surface traction and safety. Being used for various purposes, these footwears provide comprehensive safety to the wearer’s foot even in moderately challenging weather and surface conditions. And since the demand for these products is on the higher side, their manufacturers need to abide by some guidelines concerning testing and sampling to ensure the utmost quality. There are certain guidelines under IS 13995:1995 (an Indian Standard) that govern how these products should be manufactured and tested. This article discusses these requirements in detail and also unveils the process of securing the BIS certification for unlined molded rubber boots.
Notable Requirements Cited In IS 13995:1995
There is a strong connection between the IS 13995:1995 and the BIS certification for unlined molded rubber boots. The IS 13995:1995 outlines methods concerning testing and sampling for the unlined molded rubber boots having a unibody design and are used for general purposes.
Let’s have a glance over the requirements mandatory for every manufacturer.
- The product should adhere to physical and other requirements cited in the standard.
- The thickness of rubber components should not fall outside the standard’s guidelines.
- The heel thickness should be measured on the outside edge along with the heel’s length.
- Each pair of footwear
should undergo the following tests to stay compliant with what is mentioned in
the standard.
- Flexing resistance
- Tensile strength
- Tear strength test
- Thickness
- Elongation
- A laboratory must have adequate resources and qualified staff to perform standard tests. The method of selecting test specimens should be in line with IS 6368: 1971.
What Are The Marking Norms For The Boots Makers?
Every boot maker should abide by the marking norms and, thus, is required to enclose the following information in the label affixed on the product.
- Size
- Manufacturer’s identification
- ISI mark
- Batch no.
- Month and year of manufacturing
The non-licensed manufacturers or those lacking a BIS license are not allowed to affix the ISI marking on their products. These norms are also mandatory for the holders of the BIS certification for unlined molded rubber boots.
Documents for BIS Certification for Unlined Molded Rubber Boots
Here is the following paperwork that you need to arrange to apply for BIS certification for unlined molded rubber boots:
- Factory license accorded by the Labour department
- Detail of QMS – Quality management system in use
- Pollution NOC accorded by SPCB
- Legal paper such as partnership deed or COI
- List of apparatus and equipment in the lab
- A lab report issued by an accredited lab affirming the product quality
- Flowchart depicting how the production of boots takes place
- Details and specs of boots requiring BIS ISI scheme
- List of all production-related machinery
- Trademark registration
- An authorization letter from the company’s top official if the applicant is an agent
How to Obtain BIS Certification for Unlined Molded Rubber Boots?
The detailed procedure relating to the BIS certification for unlined molded rubber boots is as follows:
Step 1: File the E-Application on the BIS Website
First of all, navigate to the BIS website[1] and find the application concerning the BIS ISI certificate. Once you locate the application, open the same and fill it out with legit details.
Avoid adding any information which you think is not worth including or may lead to the cancellation of the application.
Once done, head to the document section and upload the required documents in the recommended format. Thereafter, proceed to the payment section to submit the fee.
Note: The registration of more than one product is not possible via a single application. Every individual application can help register a single product type only. Thus, filing separate applications becomes a necessity for those seeking BIS registration for multiple products.
Step 2: Paperwork and Production Premise vetting
Post receiving the application, the authority i.e. BIS will perform an in-depth inspection of the document for any flaws. Thereafter, designated officials shall visit the production premise and inspect the facility for compliance. While doing so, they will consider the following parameters:
- Manufacturing Infrastructure
- Testing capabilities
- Production process
- Standard(s) being followed
Note: Post successful premise inspection, the officials will undergo another important undertaking, which is sample collection. They will perform this undertaking in accordance with standard guidelines.
Step 3: Testing of sample(s) and report preparation
As soon as the accredited lab receives the samples from the officials, it will commence the testing process, under which they will perform the following tests:
- Flexing resistance
- Tensile strength
- Tear strength test
- Thickness
- Elongation
After conducting these tests successfully, the lab will enclose their outcomes and observations in a detailed report, which will stay valid for a limited timeline.
Note: The lab shall intimate the applicant to collect the test report. The applicant, in response, shall collect the report on time and share the same with BIS before the validity gets exhausted.
Step 4: Report Review and Grant of BIS license
This is the final step in the process in which the authority shall review the report to discover any flaws in the product triggered by the tests performed on them. The authority shall grant the certification if the report comes out positive.
Conclusion
BIS certification for unlined molded rubber boots is a mandatory legal document for bootmakers. Those who manufacture such products without BIS certification and illicitly use the ISI marking shall be penalized strictly. Let Corpbiz’s experts be your guiding light if you find it hard to cope with the endless compliance or convoluted paperwork. We make things easier for our clients through best-in-class professional services concerning BIS certification.
Also Read:
An Overview Of BIS Registration Process For Footwear Products
BIS Certification For Footwear Manufacturers: How To Obtain It?
